Filter
Top Products
2.
Remove the subwoofer (2) from the base enclosure.
NOTE: The subwoofer includes two rubber isolators (3). These isolators are crucial to the
performance of the subwoofer.
Reverse this procedure to install the subwoofer.
Power connector cable
Description Spare part number
Power connector cable (includes bracket) 686900-001
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 47), and then remove the following components:
a. Hard drive (see
Hard drive on page 48)
b. Optical drive (see
Optical drive on page 52)
c.
Keyboard (see
Keyboard on page 56)
d. Top cover (see
Top cover on page 65)
88 Chapter 4 Removal and replacement procedures