Filter
Top Products
Chapter 5
Hardware Monitor Configuration Files
Monitor Configuration Files
91
#POLL_INTERVAL 5 # polling interval in minutes
#REPEAT_FREQUENCY 1440 # in minutes, for one day
#****************************************************************************#
#* This list of default actions for each severity also appears in the *#
#* global configuration file, and should not generally appear here. *#
#* It is shown for documentation purposes. *#
#****************************************************************************#
#SEVERITY_ACTION INFORMATION NOTIFY
#SEVERITY_ACTION MINOR_WARNING NOTIFY
#SEVERITY_ACTION MAJOR_WARNING NOTIFY
#SEVERITY_ACTION SERIOUS NOTIFY
#SEVERITY_ACTION CRITICAL NOTIFY
#****************************************************************************#
#* cfg-verb event# severity- action- -description- *#
#****************************************************************************#
DEFINE_EVENT 101 CRITICAL DEFAULT # The disk is indicating a fault
DEFINE_EVENT 102 CRITICAL DEFAULT # The disk is not on the FC link
DEFINE_EVENT 201 CRITICAL DEFAULT # The power supply has faulted
DEFINE_EVENT 202 CRITICAL DEFAULT # The power supply is not recieving adequate AC
DEFINE_EVENT 301 CRITICAL DEFAULT # The fan is not providing cooling
DEFINE_EVENT 302 CRITICAL DEFAULT # Temperature has exceeded critial threshold
DEFINE_EVENT 303 MAJOR_WARNING DEFAULT # Temperature has exceeded warning threshold
DEFINE_EVENT 304 CRITICAL DEFAULT # Temperature has exceeded low critial threshold
DEFINE_EVENT 305 MAJOR_WARNING DEFAULT # Temperature has exceeded low warning threshold
DEFINE_EVENT 306 MAJOR_WARNING DEFAULT # Temperature sensor may have failed
DEFINE_EVENT 401 CRITICAL DEFAULT # The enclosure services controller has failed
DEFINE_EVENT 501 CRITICAL DEFAULT # The SCSI port/transceiver has lost the link
DEFINE_EVENT 502 CRITICAL DEFAULT # The transmit signal has been lost
DEFINE_EVENT 601 CRITICAL DEFAULT # Over voltage critical threshold exceeded
DEFINE_EVENT 602 MAJOR_WARNING DEFAULT # Over voltage warning threshold exceeded
DEFINE_EVENT 603 CRITICAL DEFAULT # Under voltage critical threshold exceeded
DEFINE_EVENT 604 MAJOR_WARNING DEFAULT # Under voltage warning threshold exceeded
DEFINE_EVENT 605 MAJOR_WARNING DEFAULT # Voltage sensor may have failed