Filter
Top Products
3.
Remove the fingerprint reader board and cable (3).
Reverse this procedure to install the fingerprint reader board.
Top cover
NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable. The TouchPad cable
is also available in the Cable Kit, spare part number 651384-001.
Description Spare part number
For use on computer models equipped with a fingerprint reader 685407-001
For use on computer models not equipped with a fingerprint reader 685406-001
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 50), and then remove the following components:
a. Service cover (see
Service cover on page 52)
b. Bluetooth module (see
Bluetooth module on page 54)
Component replacement procedures
87