Filter
Top Products
14
B. Initialize Storage Drive (This is the drive being used to store the RIS image)
To start the disk administrator use the following procedure.
1. Click Start | Programs | Administrative Tools | Computer Management.
2. Expand the Storage folder if necessary.
3. Double click Disk Management.
4. The "Write signature and Upgrade" wizard will start if you have new hard drives
with no signatures on them. Follow the instructions provided by the wizard to
create the new hard drive signature.
5. Perform formatting and partitioning. A suggested name is Storage Drive.
NOTE: There are two types of hard drive configuration: Dynamic and
Basic. Select the appropriate type by right clicking on the drive
icon on the screen. Dynamic drives are used to create volumes that
can contain more than one physical hard drive. Basic drives are
used to create primary or locally partitioned drives. Use basic
drives in this procedure.