Filter
Top Products
53
System Administration Configuration Checklist
13. During the reboot, use the F2 key to enter the bc1100 BIOS setup screens to change
the boot order to the hard drive setting.
14. Press the F4-BOOT OPTIONS key to change the BOOT ORDER to put “+Hard
Drive” at the top of the list.
NOTE If this is not done, the bc1100 server blade will connect again to the
RIS server using the PXE process, which leads to a new download.
15. After making the boot order changes, use the F10 key to exit. The system will reboot
off the bc1100 hard disk installation of the Window 2000 Advanced Server.
NOTE At the completion of this reboot, the standard GUI login screen will
appear. Like all initial installations there is no password assigned
to the Username "Administrator". Click the OK button on the GUI
to continue configuration for the environment.