Filter
Top Products
Removal and replacement procedures 28
Hard drive backplane
To remove the component:
1.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).
4.
Remove all hard drives ("Hard drive" on page 25).
5.
Remove all hard drive blanks ("Hard drive blank" on page 24).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.
6.
Remove the hard drive backplane.
To replace the component, reverse the removal procedure.
Front panel/hard drive cage assembly
To remove the component:
1.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).
4.
Remove all hard drives ("Hard drive" on page 25).
5.
Remove all hard drive blanks ("Hard drive blank" on page 24).
6.
Remove the hard drive backplane ("Hard drive backplane" on page 28).