Filter
Top Products
Removal and replacement procedures 41
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).
4.
Remove all hard drive blanks ("Hard drive blank" on page 24).
5.
Remove all hard drives ("Hard drive" on page 25).
6.
Remove the hard drive backplane ("Hard drive backplane" on page 28).
7.
Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 28).
8.
Remove all DIMM baffles ("DIMM baffle" on page 26).
9.
Remove all DIMMs ("DIMMs" on page 27).
10.
Remove any mezzanine cards ("Mezzanine card" on page 29).
11.
Remove the USB key, if any ("System board components" on page 58).
12.
Remove the cache module ("HP Smart Array E200i Controller cache module" on page 30).
13.
Remove the heatsink ("Heatsink" on page 34).
14.
Open the processor retaining latch and the processor socket retaining bracket.