Filter
Top Products
2. Remove the cover (2).
Media card reader assembly (smart card reader)
Description Spare part number
Media card reader assembly (smart card reader) 687097-001
Media card reader assembly (smart card reader) for touch models only 702928-001
Before removing the media reader assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 39).
5. Remove the base enclosure (see
Base enclosure on page 42).
6. Disconnect the battery cable (see
Battery on page 43).
Remove the media card reader assembly:
1. Remove the 2 screws (1), and then lift the media card reader assembly (2).
Component replacement procedures 63