HP (Hewlett-Packard) C2K82UARABL Laptop User Manual


 
Remove the USB/Audio board:
1. Disconnect the USB/Audio board cable from the system board (1)
2. Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board (2).
3. Remove the USB/Audio board (3).
Power connector cable
Description Spare part number
Power connector cable (includes bracket) 686577-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 39).
5. Remove the base enclosure (see
Base enclosure on page 42).
6. Disconnect the battery cable (see
Battery on page 43).
7. Remove the subwoofer (see
Subwoofer on page 64).
Component replacement procedures 67