![](http://pdfasset.owneriq.net/2/6b/26b0bc1b-e6d0-4158-a023-11df9543b9e3/26b0bc1b-e6d0-4158-a023-11df9543b9e3-bg2b.png)
Remove the base enclosure:
1. Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws.
2. Remove the bottom enclosure.
NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool
Shroud separator, available on the HP website.
Component replacement procedures 35