Filter
Top Products
3. Remove the USB/Audio board (3).
Power connector cable
Description Spare part number
Power connector cable (includes bracket) 686593–001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 32).
5. Remove the base enclosure (see
Base enclosure on page 34).
6. Disconnect the battery cable (see
Battery on page 36).
7. Remove the subwoofer (see
Subwoofer on page 56).
8. Remove the security bracket (see
Security bracket on page 57).
9. Remove the USB/Audio board (see
USB/Audio board on page 58).
Component replacement procedures 59