Filter
Top Products
Hard drive
Description Spare part number
320-GB 7200RPM SATA 7mm 634862–005
320-GB 5400RPM SATA 7mm 645193–005
500-GB 5400RPM SATA 7mm 683802–005
32-GB mSATA solid-state drive (SSD) 687100–001
128-GB mSATA solid-state drive (SSD) 687101–001
Before removing the hard drive or SSD, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 32).
5. Remove the base enclosure (see
Base enclosure on page 34).
6. Disconnect the battery cable (see
Battery on page 36).
Remove the hard drive:
1. Disconnect the hard drive cable from the system board (1), and then remove the 4 screws (2)
securing the hard drive to the top cover.
38 Chapter 4 Removal and replacement procedures