Filter
Top Products
Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket or screws.
Description Spare part number
750-GB, 7200-rpm, 9.5-mm 633252-001
500-GB, 7200-rpm, 9.5-mm SED 683801-001
500-GB, 7200-rpm, 9.5-mm 634925-001
320-GB, 7200-rpm, 9.5-mm 634862-001
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector adapter, and screws) 651380-001
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 50).
5. Remove the service cover (see
Service cover on page 52).
Remove the hard drive:
1. Loosen the four captive Phillips screws (1) that secure the hard drive to the computer.
2. Use the hard drive tab (2) to slide the hard drive toward the front of the computer and disconnect
it from the system board.
58 Chapter 4 Removal and replacement procedures