Filter
Top Products
Reverse this procedure to reassemble and install the hard drive.
Fan
Description Spare part number
Fan (includes cable) 651378-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 50).
5.
Remove the service cover (see
Service cover on page 52).
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Loosen the two captive screws (2) that secure the fan to the top cover.
60 Chapter 4 Removal and replacement procedures