Filter
Top Products
2. Unclip the TouchPad LED board (2), and then remove it (3).
Power connector cable
Description Spare part number
Power connector cable (includes bracket) 689937-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 54).
5. Remove the base enclosure (see
Base enclosure on page 29).
6. Disconnect the battery cable (see
Battery on page 31).
Remove the power connector cable:
1. Turn the computer, with the right side toward you.
50 Chapter 4 Removal and replacement procedures