Filter
Top Products
Figure 13 CNA select screen
Figure 14 (page 18) shows the CNA BIOS main menu. On this screen, the CNA firmware and
BIOS versions display along with the CNA Port WWN, BIOS enablement state, VLAN, and DCBX
mode. Take note of the code revisions and compare them to the latest supported version for your
server. This menu is typically used for configuring BFS. In addition to the revision configuration
information display, Scan for Target Devices is also a useful troubleshooting tool for zoning issues.
This display is limited and only displays the first LUN for each storage device detected.
Many parameters and options are available with this utility, but do not change any parameters
unless instructed by technical support.
Figure 14 CNA BIOS main menu
18 Troubleshooting