Filter
Top Products
8-12 ENWW
To avoid jams
l Make sure nothing is blocking the paper path.
l Do not overload the trays. Tray 1 holds 150 sheets of plain paper or
30 transparencies. Tray 2 holds 250 sheets of paper. The front
manual feed holds up to ten sheets of paper or three
transparencies.
l Load paper properly. For instructions about loading media see
“Load paper.”
l Do not use media that is curled or crumpled.
l Always use media that conforms with specifications listed in
“Selecting print media.”
l Make sure the output tray is not overly full when you send a job to
print.
l Be sure to align the media against the right side of the tray.
l Verify that the guides are adjusted snugly against the stack of print
media, but that they do not crinkle or bend the media.
Paper tray cannot be inserted
l With the tray removed from the printer, turn the printer off and then
on again. Reinsert the tray.
l Make sure the tray is aligned with the printer opening.
Paper-feed problems
Media is not picked up from Tray 1 or Tray 2
l Check that the width guide is snug, but not tight, against the paper
stack.
l Make sure the media you are using is not curled. Uncurl paper by
bending it in the opposite direction of the curl.
EulerUG.book Page 12 Monday, July 16, 2001 5:34 PM