HP (Hewlett-Packard) D1B19UARABA Computer Accessories User Manual


 
Hard drive
NOTE: The hard drive spare part kit does not include the hard drive connector cable, hard drive
bracket, or screws. These components are included in the Hard Drive Hardware Kit, spare part number
682063-001.
Description Spare part number
For use on all computer models:
750-GB, 7200-rpm, 9.5-mm 633252-001
750-GB, 5400-rpm, 9.5-mm 634250-001
640-GB, 5400-rpm, 9.5-mm 669300-001
500-GB, 7200-rpm, 9.5-mm 634925-001
500-GB, 5400-rpm, 9.5-mm 669299-001
320-GB, 7200-rpm, 9.5-mm 641672-001
For use only on computer models equipped with an AMD processor:
1-TB, 5400-rpm, 12.7-mm 638974-001
320-GB, 5400-rpm, 9.5-mm 645193-001
For use only on computer models equipped with an Intel processor:
1-TB, 5400-rpm, 12.7-mm 676521-001
750-GB, 7200-rpm, 9.5-mm 684506-001
320-GB, 5400-rpm, 9.5-mm 622643-001
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 51).
Remove the hard drive:
1.
Slide the battery release latch (1) to release the service cover.
2.
Slide the service cover (2) toward the front of the computer.
52 Chapter 4 Removal and replacement procedures