Filter
Top Products
Optical drive
NOTE: The optical drive spare part kit includes a bezel and bracket.
Description Spare part number
Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive 682084-001
Blu-ray Disc R/RW with SuperMulti Drive 682085-001
DVD±RW Double-Layer with SuperMulti Drive 682083-001
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 51).
5. Remove the service cover (see
Hard drive on page 52).
Remove the optical drive:
1. Remove the Phillips PM2.5×5.5 screw (1) that secures the optical drive to the computer.
2. Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
Component replacement procedures
59