Filter
Top Products
8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter
Microsoft Windows NT 4.0 Workstation
8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet
Adapter
Microsoft Windows NT
4.0 Workstation
Connecting to a Novell
NetWare 4.11 Server
Requirements
• HP Vectra with Windows NT4.0 Workstation.
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.SYS, version 4.22.1
• Microsoft Windows NT 4.0 Workstation media.
• Microsoft Windows NT 4.0 Service Pack 4 media.
• Novell NetWare 4.11 Server system that supports IPX network protocol.
• Novell IntranetWare Client for Windows NT v4.11b installation media.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the D-Link DFE-500TX network
adapter into a PCI slot.
2 Connect network cable media to the D-Link DFE-500TX network adapter.
3 Power on the system and log into Windows NT with administrator
privileges.
4 Open the “Network Properties” window and agree to install “Windows NT
Networking”.
5 With “Wired to the Network” checked, click on “Next”.
6 Click on the option to “Select from list” then on “Have Disk”.
7 Insert the D-Link DFE-500TX driver disk into the floppy drive.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 11 03 10
I/O Address 1080 DC00 E400