Filter
Top Products
11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter
Connecting to a Novell NetWare 4.11 Server
9 After Windows loads, go to the “MAIN” program group, and double-click
on “Control Panel”.
10 Select the “Network” icon, and click “YES” to install NT networking.
11 Insert the Windows NT Workstation CD.
12 In the “Windows NT Setup”, set path to your NT files.
13 Click on the “Do Not Detect” button from the “Network Adapter Card
Detection” dialog box, and click on “Continue” in the second “Network
Adapter Card Detection” dialog box.
14 From the “Drop Down List”, scroll down and select “<Other> Requires
disk from manufacturer”, then click on “Continue”.
15 Set the path to “A:\” in the “Insert Disk” dialog box, and insert the D-Link
driver disk.
16 Click “OK” at the “Install Driver” dialog box.
17 Select “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)” in the
“Select OEM Option” dialog box, and click “OK”.
18 Click on the “Continue” button in the “D-Link DFE-500TX Adapter (*Rev
B/C)” setup box.
19 Choose the default protocol and any additional network protocols by
clicking the check boxes in the “Windows NT Setup” dialog box, and click
“Continue”.
20 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept
the default “Workgroup” as your workgroup name.
21 To complete the installation, remove the floppy disk, and click on “Restart
Computer” button.
22 Install the Windows NT3.51 Service Pack 5 application.