Filter
Top Products
Hardware Options Installation
8. Connect the data cable to the DVD drive.
Figure 4-12: Connecting the data cable
9. Reinstall the access panel.
10. Restore the server to its operating position in the rack.
11. Power up the server.
Hard Drive Installation
The server supports up to two hard drives.
To install a hard drive:
1. Power down the server. Refer to “Powering Down the Server” in Chapter 2, “Server
Operations.”
2. Extend the server from the rack. Refer to “Extending the Server from the Rack” in
Chapter 2, “Server Operations.”
3. Remove the access panel. Refer to “Removing the Access Panel” in Chapter 2, “Server
Operations.”
4. Remove the DVD drive or media bay blank. For more information, refer to the “Installing
a DVD Drive” section earlier in this chapter.
HP ProLiant DL145 Server User Guide 4-9