Filter
Top Products
Operating System Installation and Software
Logging Into the Management Processor Command Line Interface
To log into the Management Processor CLI and enter Terminal mode:
1. Establish a connection to the server by doing one of the following:
— Establish serial communication to the server as described in “Configuring Access
Through the Serial Port” in this chapter.
— Launch a Telnet session as described in “Configuring Access Through the Network”
in this chapter.
2. Press the Shift+Esc+9 keys. The Management Processor CLI appears.
3. Enter the username at the login: prompt.
4. Enter the password at the password: prompt.
NOTE: The default usernames and passwords are:
• OEM/OEM
• admin/admin
• Operator/Operator
• <null>/<null>
Privileges for the different accounts are discussed in “User Accounts” in this chapter.
The ProLiant> prompt appears.
Logging Out of the Management Processor CLI
To exit the Management Processor CLI and enter Console mode, do one of the following:
•
•
Press the Shift+Esc+Q keys.
Enter the
quit command at the ProLiant> prompt.
HP ProLiant DL145 Server User Guide 5-19