HP (Hewlett-Packard) DL165 Computer Hardware User Manual


 
HP Hard Drives
NOTE:
The components of a storage subsystem (e.g. the drive, the
HBA/controller, and the server backplane) should operate at the same data
transfer rate or the system bandwidth will be negotiated down to an acceptable
level for all components.
NOTE:
Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE:
A minimum of one SATA Non-Hot Plug hard drive is required ONLY
when purchasing Non-Hot Plug CTO Chassis Model (P/N 591660-B21) in Step
1.
Serial-ATA (SATA) Non-Hot Plug Hard Drives
(Non-Hot Plug Models Only)
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard
Drive
571232-B21
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard
Drive
458947-B21
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
507774-B21
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
507772-B21
HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
462595-B21
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
458941-B21
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
458939-B21
HP Storage Controllers
NOTE:
With the HP Smart Array P410 Controller, the addition of the battery
backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical
drive extension, RAID migration, and stripe size migration. In order to upgrade to
RAID 6, at least 256MB Cache and a Battery is required in addition to the Smart
Array Advanced Pack license (P/N 516471-B21).
NOTE:
To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis, a HP Smart Array P410 controller must be selected. When selecting
the HP Smart Array P212 Controller (P/N 491191-B21), the controller will be
installed in the x16 slot since it has both an internal and external port. This
prevents the use of the internal slot and no PCI-E slots will be available.
NOTE:
A minimum of one primary HP Storage Controller is required ONLY
when purchasing SFF CTO Chassis Model (P/N 592227-B21) in Step 1.
HP Smart Array P812/1G Flash Backed Cache Controller
487204-B21
HP P410 w/1G Flash Backed Cache Controller
572532-B21
HP P410 w/512MB Flash Backed Cache Controller
578230-B21
HP P410/Zero Memory FIO Smart Array Controller
462860-B21
HP P410/256MB Smart Array Controller
462862-B21
HP Smart Array P410/256MB w/ Battery FIO
491195-B21
HP P410/512MB BBWC Smart Array Controller
462864-B21
QuickSpecs
HP ProLiant DL165 Generation 7
Configuration Information - Factory Integrated Models
DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010
Page 15