Filter
Top Products
HP B110i Smart Array
Controller
Drives Supported
Up to 4 SATA devices
Channels
4 1.5Gb SATA
Storage Capacity
3.0TB internal storage
Data Transfer Method
32-bit/33-MHz PCI bus-master
Maximum SATA
Channel Transfer Rate
1.5Gb/s per channel
Maximum Transfer
Rate per PCI Bus
(peak)
266 MB/s per channel
Protocols
SATA
PIO Mode[0-4]
Cable
SATA
Internal ATA
Connectors
Four SATA connectors
NOTE:
Raid support requires optional slot based raid controller.
Smart Array P410/410i
Controller
Disk Drive and
Enclosure Interface
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
SAS Connectors
2 internal (Mini-SAS) x8 wide port connectors
Cache Memory Speed
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
Server Interface
x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth
SAS Speed
x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth
Cache Memory
40-bit 256MB ECC protected cache (72-bit 512MB BBWC module
upgrades available); transportable with battery-backed upgrade
Logical Drives
Supported
Up to 64 logical drives
Host Memory
Addressing
64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 6, 6+0 (Advanced Data Guarding)
NOTE:
The minimum of 256 MB cache, battery kit, and Smart Array
Advanced Pack License Key upgrade is required to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data Guarding)
NOTE:
The 256 MB is required to enable RAID 5, 5+0 support of the
Smart Array P410i
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
QuickSpecs
HP ProLiant DL165 Generation 7
Technical Specifications
DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010
Page 37