Filter
Top Products
16. Use a tool to gently pry the display hinge covers (2) from the display.
17. Remove the four Phillips M2.5x3.0 screws (1) that secure the display brackets to the display.
Remove the display brackets (2) from the display. The display bracket and hinge set are
available using spare part number 608214-001.
NOTE: Note the WLAN antenna routing path through the right hinge for replacement.
The silver screws go on the outside of the hinges.
18. If it is necessary to replace the wireless antennas and cables, remove the adhesive strip (1) that
secures each antenna to the display back cover.
19. Remove the antennas from the clips (2) built into the top of the display enclosure.
Component replacement procedures 61