Filter
Top Products
5–14 Maintenance and Service Guide
Removal and Replacement Procedures
3. Make note of which wireless antenna cable is attached to
which terminal on the Mini Card module, then disconnect the
auxiliary and main antenna cables 1 from the Mini Card
module.
4. Flex the Mini Card release tab 2 forward to release the
Mini Card module. (The edge of the module opposite
the socket rises away from the computer.)
5. Remove the Mini Card module by pulling the module away
from the socket at an angle 3.
✎
Mini Card modules are designed with a notch 4 to prevent
incorrect installation into the Mini Card module socket.
Removing a Mini Card Module
Reverse the above procedure to install a Mini Card module.