Filter
Top Products
5–60 Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the following screws:
1 One Phillips PM2.5×3.0 screw that secures the expansion
port 2 bracket to the system board
2 Two slotted SM1.5×9.0 screws on each side of the
expansion port 2 that secure the expansion port 2 bracket
to the system board
3 Two Phillips PM3.0×6.0 screws on each side of the
external monitor port that secure the fan/heat sink
assembly to the system board
Removing the Fan/Heat Sink Assembly Screws, Part 1