5–6 Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Hard Drive
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Loosen the two black Phillips PM2.5×5.0 screws 1 that
secure the hard drive cover to the computer.
3. Lift the left edge of the hard drive cover 2 and swing it up
and to the right and remove it.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 407778-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
5400 rpm, 100-GB
5400 rpm, 80-GB
5400 rpm, 60-GB
5400 rpm, 40-GB
407770-001
407847-001
407769-001
407768-001