Filter
Top Products
Serial/Telnet User Interface
125Network Storage Router e1200-160
Trace Settings Menu options:
■ 1) Trace Settings Configuration configures the trace settings.
■ 2) Event Settings Configuration configures the event settings.
Each of these options is discussed in the following sections.
Configuring Trace Settings
In the Utility Trace Settings Menu, 1) Trace Setting Configuration is used to
modify trace levels. Two pages of trace level settings are displayed.
Figure 61 and Figure 62 are illustrations of the two Trace Settings screens.
Note: Trace settings should not be modified in normal operation; performance
degradation may result.
1. To change any of the settings in these screens, enter the number that
corresponds to the option that needs to be changed.
The current setting is toggled to either On or Off.
2. Repeat Step 2 for each setting that needs to be changed in the page.
3. Before leaving the page, activate the new setting by entering U) Update
Current Operating Trace Levels.
This option forces the currently displayed trace settings to become effective
immediately, without requiring a reboot or power cycle.
Figure 61: Trace Settings screen