Filter
Top Products
Visual Manager User Interface
73Network Storage Router e1200-160
Note: Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have
entries deleted.
Note: Map settings are saved to memory when any button within the page is selected.
Note: SCSI maps can be filled or devices can be added to them only when at least
one SCSI Target ID has been enabled in the SCSI Bus Configuration Menu.
SCSI Map settings:
■ Clear Map clears all entries from the current map.
■ Fill Map fills in the current map.
When the map is filled, the display shows the current devices.
■ Remove Gaps removes any incremental gaps in the sequence of LUNs listed
in the table.
When the system removes gaps from the table, the LUNs are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table to
detect all devices.
■ Delete deletes map entries.
To delete a range of LUNs, select the beginning LUN to delete from the
‘from’ drop-down box and select the last LUN to delete from the ‘to’
drop-down box.
■ Discovered Device Entry adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section
of the screen.
■ Manual Device Entry creates a map entry for a device that is not yet
discovered or installed. To add a new device to the map, use the drop-down
boxes to enter the settings, and then click Create Entry in the Manual Device
Entry section of the screen.