Filter
Top Products
Serial/Telnet User Interface
93Network Storage Router e1200-160
4. Configure the serial port settings, as listed in Table 7.
Note: HP recommends setting the baud rate to 115200.
5. After completing the serial port configuration, select OK to start a serial
session.
6. After the serial session has started, press Enter several times to initiate router
communication and display the Configuration Menu.
Table 7: Terminal Configuration Settings
BAUD Rate
Autobaud, 9600, 19200, 38400, 57600, 115200
Data Bits
8
Stop Bit
1
Parity
None
Flow Control
XON/XOFF