HP (Hewlett-Packard) ep9010 Projector User Manual


 
Setting up
User’s Guide 29
Turning the projector on and off
Turning the projector on
1. Be sure the power cord is connected.
2. Open the lens by sliding the lens cover
1 to the left.
3. Press the power button
2 on the projector or on the remote control.
The projector takes a minute or so to warm up. The power button blinks
during warm-up.
It is normal for parts of the projector and the air coming out of the projector
to be very warm. If the projector starts to overheat, the temperature warning
light will turn on and the projector will shut down.