Filter
Top Products
7. Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install an optical drive.
Expansion memory module
Description Spare part number
2048-MB memory module (PC2-6400, 667-MHz, DDR2) 483194-001
1024-MB memory module (PC2-6400, 667-MHz, DDR2) 483193-001
Before removing the expansion memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47).
Remove the expansion memory module:
1. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory/WLAN module
compartment cover to the computer.
Component replacement procedures 57