Filter
Top Products
4. Remove the battery (see Battery on page 47).
5. Remove the following:
a. Hard drive (see
Hard drive on page 53)
b. Optical drive (see
Optical drive on page 56)
c. Keyboard (see
Keyboard on page 61)
d. Switch cover (see
Switch cover on page 66)
e. Display assembly (see
Display assembly on page 75)
f. Top cover (see
Top cover on page 81)
g. ExpressCard board (see
ExpressCard board on page 84)
h. Audio board (see
Audio board on page 85)
Remove the speaker:
1. Remove the two Phillips PM2.5×5.0 screws (1) that secure the speaker to the base enclosure.
2. Remove the speaker (2).
Reverse this procedure to install the speaker.
Component replacement procedures 89