HP (Hewlett-Packard) G7 Laptop User Manual


 
Reverse this procedure to install the processor.
Display assembly
NOTE: The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables).
Description Spare part number
17.3-in, HD, LED, BrightView display assembly (includes webcam, two microphones, and wireless antenna transceivers
and cables)
In butter gold finish 640223-001
In charcoal gray finish 640226-001
In luminous rose finish 640225-001
In ocean drive finish 640224-001
In Pacific blue finish 640221-001
In pearl pink finish 640228-001
In pewter finish 640227-001
In Sonoma red finish 640220-001
In sweet purple finish 640222-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47), and then remove the following components:
Optical drive (see
Optical drive on page 49)
Hard drive (see
Hard drive on page 51)
WLAN module (see
WLAN module on page 55)
Keyboard (see
Keyboard on page 57)
Top cover (see
Top cover on page 61)
Component replacement procedures
93