21
Switch ports per server blade enclosure
• Eight external 10/100/1000T (C-GbE2) or 1000SX (F-GbE2) Gigabit Ethernet ports on a hot-pluggable rear-mounted
interconnect module
• Four external 10/100/1000T Gigabit Ethernet ports on switch front panels
• Two external DB-9 serial ports on switch front panels (one per switch)
• 32 internal 10/100/1000 Gigabit Ethernet ports to server blade network adapters (4 per server bay)
• Two internal 10/100/1000 Gigabit Ethernet inter-switch crosslinks for switch to switch communication and failover
scenarios
• 10 gigabit fabric for future layer 7 switching and 10 Gigabit Ethernet uplink cpability
• 16 BL20p G2 Fibre Channel pass-though signals (with GbE2 Storage Connectivity Kit)
• I
2
C Switch to management module communications
• All external Ethernet ports may be used for data, switch and iLO management, and/or PXE remote configuration.
• All internal Ethernet signals routed as Ethernet across individual CAT5e signal traces
• 12 RJ-45 (C-GbE2) or 8 LC fiber and 4 RJ-45 (F-GbE2) external Ethernet port connectors
• 16 pluggable, small form factor external slots for Fibre Channel port connectors (with GbE2 Storage Connectivity Kit)
Switch physical and environmental
• AC power input (at server blade system level)
• Direct facility -48 DC power input
• 81 Typical and 113 maximum power consumption per switch (watts)
• Local front power reset/power cycle button on each switch
• Remote reset/power cycle via user interface
• 10 to 35 operating and -30 to 60 storage temperature (Celsius)
• 20% to 80% operating and 5% to 95% storage relative humidity
• FCC Class A, ICES-003 Class A, AS/NZS 3548 Class A, and VCCI Class A electromagnetic interference (EMI) certifications
• UL/CUL and CE safety certifications
• 12.0 pounds per interconnect switch and interconnect module