Filter
Top Products
Speakers
Description Spare part number
Speakers (include speaker cables and wireless audio module antenna cables) 672013-001
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 33), and then remove the following components:
a. Solid-state drive connector board cable (see
Solid-state drive on page 35)
b. Card Reader board cable (see
Card Reader board cable on page 37)
c. Top cover (see
Top cover on page 40)
Remove the speakers:
1. Disconnect the wireless audio module antenna cables (1) from the terminals on the wireless
audio module.
NOTE: The #7/Main wireless audio module antenna cable is connected to the wireless
audio module module “Main” terminal. The #8/Aux wireless audio module antenna cable is
connected to the wireless audio module module “Aux” terminal.
2.
Release the wireless audio module antenna cables from the clips (2) and routing channels built
into the base enclosure.
48 Chapter 4 Removal and replacement procedures