Filter
Top Products
Hard drive
NOTE: The hard drive spare part kits include the bracket and the screws.
Description Spare part number
320 GB, 7200 rpm, 7 mm (2.5 in) SED hard drive
656621-001
320 GB, 7200 rpm, 7 mm (2.5 in) hard drive
656620-001
250 GB, 7200 rpm, 7 mm (2.5 in) hard drive
656619-001
160 GB solid-state drive (SSD) 653018-001
128 GB SSD 653017-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Remove the battery (see
Battery on page 43)
b.
Remove the service access cover (see
Service access cover on page 44)
Remove the hard drive:
1.
Loosen the Phillips M2.5×8.0 captive screw (1) that secures the hard drive bracket to the
computer.
2.
Grasp the tab on the hard drive and slide it forward to disconnect the hard drive.
48 Chapter 4 Removal and replacement procedures