Filter
Top Products
2.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a secondary memory module.
Top cover
The top cover kit includes the TouchPad board and capacitive board.
Description Spare part number
Top cover 649768-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Remove the battery (see
Battery on page 43)
b.
Remove the service access cover (see
Service access cover on page 44)
60 Chapter 4 Removal and replacement procedures