Filter
Top Products
c.
Remove the keyboard (see
Keyboard on page 55)
d.
Remove the secondary memory module (see
Secondary memory module on page 58)
Remove the top cover:
1.
Turn the computer upside-down, with the front toward you.
2.
Remove the two Torx 8M2.0×7.0 screws (1) located in the bottom feet. You do not need to
remove the feet.
3.
Remove the two screw caps (2) and the two Torx 8M2.0x5.0 screws (3) located below the
battery bay.
4.
Turn the computer right-side up, with the front toward you.
5.
Open the display as far as possible.
6.
Release the ZIF connector (1) that secures the audio cable to the system board and remove the
audio cable (2) from the ZIF connector.
7.
Release the ZIF connector (3) that secures the TouchPad button cable to the system board and
remove the touchpad button cable (4) from the ZIF connector.
Component replacement procedures
61