Filter
Top Products
IU 675 / 0150 12 TowerFeed
TM
for the HP LaserJet 9000
INSTALLATION
Software Installation
Installing the Printer Driver
Install the printer drivers delivered with your HP LaserJet as usual. In case of questions please refer to your
printer's manual or contact your dealer.
Configuring the TowerFeed Option
The TowerFeed option has to be activated in the printer driver. To do so, go via Start – Settings – Printers to select
the respective HP LaserJet driver.
In Windows 9x get via printer Properties - tab sheet Configure to the pull-down bar of the Optional Papersources:
where you will see two TowerFeed models:
• 4x500-sheet TowerFeed 44, and
• 6x500-sheet TowerFeed 66.
Select the respective TowerFeed model.
The additional paper trays now will show up in the pull-down windows for the Paper Sources:.
In Windows NT you assign in Properties – Device Settings to each of the trays the respective paper size.
Paper Selection
In the application programs you select the paper sources in the Page Setup function (File - Page Setup), where all
available paper sources show up in the respective Paper Sources: pull-down bar(s).
Hint:
The most recent printer drivers can be downloaded from the HP WEB site (http//:www.hp.com) or from our
WEB page at http://www.rutishauser.ch/ti/sdlhp.htm.
Note:
More information and details on paper selection possibilities are described in APPENDIX B – Tips & Hints
of this manual.