Filter
Top Products
IU 675 / 0150 16 TowerFeed
TM
for the HP LaserJet 9000
APPENDIX A - Printer Specific Notes
Printer Firmware Revision
The Firmware of your HP LaserJet printer must be at least Revision 02.000.0 or higher to correctly support the
TowerFeed option. In case your printer does have an older Firmware, ask your dealer for a Firmware upgrade.
Printer Driver Revision
Please use the drivers received with your printer.
For the most recent driver revisions contact your dealer or consult the HP WEB or the Rutishauser WEB site at
http://www.rutishauser.ch/ti/sdlhp.htm.
HP LaserJet Duplexer Option
With the TowerFeed paper handling option installed, the printer's duplexing capabilities remain fully supported.
Optional HP 2000-sheet HCI Option
TowerFeed is used in place of this option and therefore, it cannot be installed together with TowerFeed.
Optional HP 3000-sheet output Stackers
This output stacker can be installed to a printer system with TowerFeed option when using the optional stand from
Rutishauser to compensate for the height difference of the units.
Other optional Devices
Besides of the HP 3000-sheet output options, no other 3
rd
party peripheral devices were tested together with the
TowerFeed option installed. Therefore, such other devices would need to be tested first for their compliance and
compatibility prior to their installation on a printer system with TowerFeed.