Filter
Top Products
12 User’s Guide
Setting Up the Projector
To install a CompactFlash wireless card
If you install a compatible CompactFlash wireless 802.11b networking card in
the CompactFlash slot, you and other presenters can connect to the projector without
using cables. The projector supports the HP L1640A CompactFlash 802.11b
card—other cards might not be compatible. If this card is not available in your region,
contact HP Support about possible options.
■ Insert the CompactFlash wireless card into the slot with the top surface of the card
facing up.
✎
You can use only one CompactFlash wireless card.
To remove the card, push the button next to the slot to pop out the button, then push
the button to eject the card.
After installing the card, configure the card. See “To set up the projector for a wireless
connection” on page 15.
For information about compatible computers and handheld organizers, see Chapter 2,
“Presenting from a Networked Computer,” on page 17 and Chapter 3, “Presenting
from a Wireless Handheld Organizer,” on page 29.
For information about installing CompactFlash memory cards, see Chapter 4,
“Presenting from a Memory Card,” on page 37.