Filter
Top Products
IU 686 / 0311 9 TowerFeed
TM
for the HP LaserJet 4200 / 4300
INSTALLATION
With stacker
• Connect stacker and TowerFeed with the provided data cable (Fig.
10 b): one end with the stacker and the other end with the
TowerFeed port. The data communication between TowerFeed
and printer takes place via stacker.
Note: The adapter will not be needed in this configuration.
• Connect the power cables to printer and TowerFeed.
Abb.10 a
Detail view of data cabel positioning
Adapter
Note:
Power ON the TowerFeed befor or simultaneously with the printer.
Caution:
When rolling TowerFeed to another place, take care when crossing
doorsteps to not tipping the unit.
To prevent tillting of the unit, do transport the TowerFeed only with
closed trays, without printer and without stacker on its wheel.
Secure trays against opening for transport.
Fig. 10 b
Cabel position on unit with stacker
and position of the power switches
Power switches