Filter
Top Products
IU 686 / 0311 8 TowerFeed
TM
for the HP LaserJet 4200 / 4300
INSTALLATION
Position and Connect Printer
Warning:
The printer may weigh up to 34 kilograms (75 pounds). Enlist the
help of a second person to lift the unit. To prevent back strain or
injury, bend your knees when lifting the unit.
• Place the TowerFeed unit at the location you wish.
If your TowerFeed is a desktop model, be sure the table or cabinet
is level and sturdy enough to carry the load.
If your TowerFeed is a floor model, be sure to place it on a flat
location. Floor model Towerfeeds especially must be level.
It might be necessary to use shims to level TowerFeed.
(Note: TowerFeed has 6 wheels)
Note:
If TowerFeed is not level, paper jams and/or left margin deviation
may occur. This is indicated if the left corner of the paper is 'dog
eared' or the left edge of the paper is shredded, or the left margin
is shifted and the print-out skewed.
Note:
To meet - requirements for absolute toppling security Tower
Feed has to be fixed to the building structure at its final location
with the fastening bows provided, prior to positioning the printer
• Carefully lift the laser printer onto TowerFeed. Place its positioning
holes on the positioning pegs of the TowerFeed top (Fig. 9).
Electrical Connection
Without Stacker
• Connect printer and TowerFeed with the data cable (Fig. 10): one
end with the printer and the other end with TowerFeed. Use the
provided Adapter as a intermediate piece (Fig. 10 a)
• Connect the power cables to printer and TowerFeed .
Note:
Power ON TowerFeed before or simultaneously with the printer.
Caution:
Only move TowerFeed to another place with drawers closed and
without printer on top to avoid hazard of toppling. Drawers need
to be secured against unintentional opening. Be careful when
crossing doorsteps or different flooring materials.
Fig. 9 Positioning the HP LaserJet Printer
Fig. 10
Connecting the Cables and
Location of the Power Switch
Fig. 10
Cabel position on unit without
stacker and position of the power
switches
Power switches