Filter
Top Products
11
2 Removing Covers and the CPU
Baseboard
CAUTION Wear a wrist strap and use a static-dissipating work surface
connected to the chassis at all times.
Before you can install the new LH 4 CPU baseboard, there are several components
to remove from the LH 3:
• Remove the bezel and covers 2 and 3 to get access to the HP NetServer’s
interior
• Remove the LH 3 CPU baseboard
• Remove the old CPU baseboard guide and the air baffle from the LH 3
chassis.
Removing the Bezel and Covers
The HP NetServer has three hand-removable cover panels and a bezel:
• Cover 1 covers the side where the I/O board is located.
• Cover 2 covers the area above the CPU baseboard.
• Cover 3 covers the side where the CPU baseboard is located.