Filter
Top Products
Chapter 3 Installing LH 4 Components
20
Figure 3-5. Removing the Memory Cards
3. Position the memory board on a static-dissipating work surface and remove
the DIMMs from their packing materials.
4. Remove a DIMM from its container, handling the module by its ends; do
not touch the pins. Lay it on an anti-static surface.
5. Locate the slot in which you will install the DIMM (shown in Figure 3-6).
Spread the two retaining clips outward (see Figure 3-7).
J1
J2
J3
J4
J5
J6
J7
J8
Bank 1
Bank 2
Bank 3
Bank 4
Figure 3-6. DIMM Slot Location