Filter
Top Products
10. Remove the optical drive from the upgrade bay (3).
To install an optical drive in the upgrade bay:
1. Turn the computer upside down on a flat surface, with the upgrade bay toward you.
2. Insert the optical drive into the upgrade bay (1).
3. Tighten the upgrade bay screw (2).
4. Replace the bottom cover (see Removing or replacing the bottom cover on page 34).
5. Insert the battery (see
Inserting or removing the battery on page 32).
6. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
7. Turn on the computer.
42 Chapter 6 Maintenance