Filter
Top Products
12
g. Set the HP FC-AL hub on the cabinet. Align the hole in each mounting ear bracket with the holes in the assembled
rail, nut, and column, and insert a 10-32 x .625 machine screw. Securely tighten the screws (see figure 7).
Figure 7. Installing the HP FC-AL hub into the cabinet
h. The plenum shroud is a back cover that slides onto the HP FC-AL hub. Set the plenum shroud on the front side of
the cabinet. Align the holes in the brackets with the holes in the assembled rails and outer posts.
i. Secure the brackets to the posts with 10-32 x .625 machine screws (see figure 8).
Figure 8. Installing the plenum shroud
j. Reinstall filler panels over the plenum shroud.
Plenum shroud